A routine forklift service in Australia costs about $150 to $600 a visit, depending on the service level and the truck. A standard 250 to 500 hour service on a forklift up to 3 tonnes is commonly quoted at $300 to $500. Extra labour runs at about $75 to $170 an hour, and repairs, tyres and batteries are billed on top. These are typical market prices as at November 2026. Some providers quote them plus GST and others don't say.
Typical forklift servicing and repair costs
The table shows typical Australian market prices for scheduled forklift servicing and for the costs that most often come on top of it, as at November 2026.
| Cost item | Typical market price | What it covers or what moves the price |
|---|---|---|
| Scheduled service, 250 to 500 hours | About $150 to $600 a visit, commonly $300 to $500 | Checklist inspection, lubrication, oil and filters on engine trucks, chain and hydraulic checks |
| Labour outside a fixed-price service | About $75 to $170 an hour | Diagnosis, repairs and extra work found during the service |
| Call-out fee for on-site work | About $150 to $220 | Travel and diagnosis, and with some providers the first hour of labour |
| Solid tyre for a small warehouse forklift | About $100 to $450 each | Tyre size and type; pneumatic and larger tyres cost more |
| Replacement lead-acid traction battery | About $2,000 to over $9,000 | Battery voltage and capacity; a 48 V battery for a 1.6 t reach truck is around $8,000 |
The scheduled service is the predictable part of the bill. Tyres and batteries come round every few years instead of every few weeks, and one battery can cost more than a year of services, so they belong in their own line of the budget.

What does a routine forklift service include for the price?
A routine forklift service covers a checklist inspection, lubrication and the fluid and filter changes due at that hour-meter reading. The technician also checks the mast, lift chains, forks, hydraulics, brakes, steering and tyres, and reports what is wearing.
The price climbs with the service level. Hangcha's XE Series electric forklifts step through services at 250, 500, 1,000 and 2,000 hours, and the larger services add jobs such as the drive axle oil change every 2,000 hours. More jobs mean more labour and more fluid, so a 2,000 hour service costs more than a 250 hour one.
Check what a quoted price includes. Some fixed-price on-site services for trucks up to 3 tonnes include travel, labour, parts and consumables. Others charge an hourly rate, then add consumables and parts, which makes two quotes look further apart or closer together than they are.
How much does forklift servicing cost per year?
Forklift servicing per year costs roughly the price of one service multiplied by the number of services the hour meter calls for. A forklift on long shifts reaches each service far sooner than one that works a few hours a week.
Say you run one 2.5 t lithium electric forklift on a single 8-hour shift, five days a week. That's 40 hours a week, so it reaches 250 hours about every six weeks and clocks 2,000 hours over a 50-week year. That's eight services a year, and at $300 to $500 each, routine servicing comes to about $2,400 to $4,000 before repairs, tyres or a battery.
Run the same truck on two shifts and it needs about 16 services, roughly $4,800 to $8,000 a year. At the other end, a truck doing 10 hours a week clocks about 500 hours a year and needs two services. Even a truck that barely runs should still get one service in every 12 months, under Safe Work Australia's guidance, while cold, dusty or wet sites change how often forklifts should be serviced.
Servicing costs for electric, LPG and diesel forklifts
An LPG or diesel forklift usually costs more to service than an electric forklift, because every visit includes engine work. Oil, filters, coolant, belts and the exhaust all need attention, and many engine models step through services more often than the 250 hours of an electric truck.
Gas trucks add one more trade. WorkSafe Queensland says only licensed gas fitters may repair or replace parts on the LPG system, so LPG forklift trucks can need a gas-qualified technician as well as the forklift service.
An electric forklift has no engine items, but it still needs the mast, chains, brakes, hydraulics and tyres serviced like any other truck. The battery is where electric costs sit. A lead-acid battery needs topping up with distilled water after charging, and a worn-out battery is the biggest single cost an electric truck brings.
Lithium removes the watering job, though the charger, cables and connectors still get checked at each service. The Hangcha XA Series lithium forklift 2-3.8 t, for example, runs an 80 V lithium battery and comes with a warranty of 24 months or 2,000 hours.
Why forklift repairs cost more than a scheduled service
A forklift repair after a breakdown usually costs more than the service that could have caught the fault. You pay the call-out, the diagnosis, labour by the hour and parts ordered at short notice, and the call-out is charged even when the repair doesn't go ahead.
Scheduled servicing finds the wear before it stops the truck. Hangcha's XE Series manual has lift chains measured at the 250 hour service and replaced when they have stretched more than 3 percent, with every chain on the mast replaced together. Forks have a hard limit too: once a fork has worn more than 10 percent at the heel, SafeWork NSW requires a new fork rather than a repair.
Downtime adds to the bill as well. A stopped forklift leaves an operator waiting and loads unmoved, and a long repair can mean hiring a replacement truck. Once repairs on an older truck cost more each year than its servicing, it's time to decide whether to repair or replace the forklift.
Is a forklift service agreement cheaper than paying per service?
A forklift service agreement isn't always cheaper than paying per service, but it makes the cost predictable. Three types are common: planned servicing at a set price per visit, full maintenance that also covers repairs from normal wear, and pay as you go.
On a truck that works a few hours a day, repairs are rare, so paying a set price per planned visit usually comes out cheaper. Full maintenance charges more each month, but the supplier then carries the cost of wear repairs, and that pays off on trucks running several shifts. Damage from collisions or misuse stays with the owner under either type, and tyres, forks and batteries are often excluded or capped.
Read the scope of a forklift service agreement rather than its name, since one supplier's full plan can cover less than another's basic one. A hired forklift is different again: under DJJ Equipment's standard hire terms, the servicing of hired machines is included and done on weekdays between 8am and 5pm.
How to keep forklift servicing costs down
The cheapest forklift servicing is the service done on time, because a missed 250 hour visit lets a small leak or a stretched chain turn into a repair. These habits keep the bill down:
- Run the daily pre-start check. The operator checks tyres, forks, chains, hydraulics, brakes, steering, horn and lights, and reports faults before they grow.
- Book the fleet together. One visit for several trucks shares the travel and call-out instead of paying it once per truck.
- Use forklift-trained technicians. WorkSafe Queensland says car and truck mechanics generally aren't competent to work on forklifts, and pneumatic tyres should be fitted only by qualified tyre fitters.
- Keep the service records. They back a warranty claim, and a full service history lifts what the truck is worth at trade-in.
WorkSafe Queensland also says to tag, lock or isolate a damaged forklift until a competent person has repaired it. A truck kept working with a known fault usually costs more to fix later.
Forklift servicing costs with DJJ
DJJ quotes forklift servicing for the machine, its hours and its site rather than publishing one price for every truck. Before a repair goes ahead, and where the assessment allows, we explain the work needed and give pricing or approval steps first.

Our forklift servicing and repairs cover all forklift brands, with on-site service within 50 km of our Silverwater NSW, Meadowbrook QLD and Bayswater WA branches and workshop repairs at each branch, during business hours.
The hours a forklift clocks each week decide most of what its servicing will cost next year, and tyres and the battery sit on top of that. Send the DJJ service team the make, model, hours and how many shifts it works, and we'll quote the service it's due for. Call the service team on 1300 646 747, or sales and hire on 1800 355 388.